Kubota SVL95-2 Delete Kit
Kubota SVL95-2 Delete Kit – Plug and Play Delete, No Reflashing, No ECU Modification
Kubota SVL95-2 Delete Kit offers a full delete of DPF and DEF systems. The installation requires no ECU removal or ECU reflash, the only thing required to install the device is disconnecting the sensors on the machine and hooking up the delete kit in their place.
The sensors that need disconnecting are three temperature sensors, differential pressure sensors, and (nitrogen oxides) NOx sensors. Additionally the ACM (aftertreatment control module) responsible for DEF control has to be disconnected as it will be digitally replaced by the delete kit.
The delete kit contains a wiring harness, equipped with the same plugs that can be found on the machine. Making the Kubota SVL95-2 Delete Kit installation fully plug-and-play and easily reversible.
The kit was designed in a way that will allow the user to return machine back to stock with ease. The delete kit installation consists of connecting the plugs instead of the sensors and replacing the physical DPF with a straight pipe. Post-installation, if needed the machine can be returned back to stock by just disconnecting the device and putting the DPF back inside.
Kubota SVL95-2 Delete Kit Installation Video
Primary models: Official factory configurations available within the Kubota SVL95-2S series:
All Kubota SVL95 models are supported by the delete kit, including:
- Kubota SVL95-2S
- Kubota SVL95-2SC
- Kubota SVL95-2SF
- Kubota SVL95-2SFC
- Kubota SVL95-2SH
- Kubota SVL95-2SHC
- Kubota SVL95-2SHF
- Kubota SVL95-2SHFC
Additional SVL95 designations and aliases:
Alternative, shortened, regional, or fleet-specific names used for the same model family.
- Kubota SVL95
- Kubota SVL95-2
- Kubota SVL95-2C
- Kubota SVL95-2HC
- Kubota SVL95-2HFC
- Kubota SVL95-2S CA
- Kubota SVL95-2SHFC-SBR
If you’re looking for a reliable, easiest to install, non-invasive Delete Kit for Kubota SVL95-2s contact us for more information!
Frequently asked questions
How to Delete Kubota SVL95-2?
In order to delete Kubota 95 Skid Steer series you need to physically remove the particulate filter (DPF), and find a way to provide accurate signals to the machine’s ECU.
4DPF.com Kubota SVL95-2 Delete Kit sorts out both. It provides the completely non-invasive and easy to install plug and play device as well as the straight pipe to replace the physical DPF. It provides all that’s required in order to delete Kubota SVL95-2s Skid Steer.
How does the installation of the Complete Kubota SVL95-2 Delete Kit works?
The installation of our Kubota SVL95-2 Delete Kit is very straightforward. The device is installed fully plug and play and does not require removing the ECU or reflashing the ECU in any way. With the use of original plugs the installation is completely non invasive and easily reversible. Kubota SVL95-2s Delete Kit offers returning machine back to stock by just disconnecting the device.
How does DPF regeneration work after filter removal?
The Kubota SVL95-2 Delete Kit simulates the operation of an efficiently working emission reduction system. The engine controller does not activate DPF regeneration because the signals generated by the Delete Kit reports that the diesel particulate filter is in perfect condition. You can find out more about Diesel Particulate Filter operation here.
Should I continue to add DEF (AdBlue) fluid?
No. The DEF/SCR pump no longer pumps the fluid. Refilling it is not necessary. The tank can be drained from the fluid and the delete kit will continue to display fluid level on the dashboard.
My machine has been diagnosed with a defective sensor. Can I install this product?
Yes! Any sensor that monitor the operation of the DPF or DEF system becomes obsolete after installing the device, so the sensors can remain damaged or be removed completely.
Got any More questions?
CHeck our FAQ Page or leave us a message at info@4dpf.com
The Best Kubota SVL95-2 Delete Kit
Give Us a Call
If you have any questions regarding the product, the installation, physical filter replacement or any other
Kubota SVL95-2s emission related issues give us a call. Our Sales Team will be happy to answer all of your questions.
